TXP Transmission Protection

  • Total transmission protection
  • Save up to 300% in tyre wear per annum
  • Put an end to fast take offs
  • Decrease damage spend
  • Make operators drive safer

The TXP system is available in 2 different versions the standard product and then the TXP Transmission Protection system plus.

TXP Transmission Protection System

The standard TXP system is designed for internal combustion engine forklifts with an electrically selectable fluid transmission. The system will stop operators from changing gears whilst the engine revs are too high or the road speed is too fast.

These features allow the gearbox and drive train to remain totally passive when a direction change is made thus protecting the forklift from potential wheel spin and potential drive train failure.

TXP Transmission Protection Plus

The TXP plus system is has some added benefits such as a dashboard diagnostic unit that allows the operator to see when it is safe to change direction and an anti-bulldoze feature. The anti-bulldoze feature will prevent operators from pushing heavy loads around site, if the system detects high revs and low road speed the system will place the transmission into neutral thus preventing any access strain.

Both systems can be easily installed by any qualified forklift trucks engineer.

Photographic example of tyre wear savings achieved by fitting a TXP Transmission Management System

Warehouse Machine

warehouse_machine

This machine works 95% of the time inside the warehouse, on a smooth epoxy painted surface, this machine has worked for 3581.0Hrs on the set of tyres shown.

Yard Machine

yard_machine

This machine works 100% of the time on surface shown in this photo. This machine loads and off loads pallets. This machine has worked for on 4240.7 Hrs on the set of tyres shown. Before tting the TXP this machine was achieving +/- 1800hrs per set of front tyres. These tyres were replaced at over 5000hrs.